Прошивка Kryptex × GMiner для ASIC
Прошивка для АСИКов
Более высокий хешрейт, выше эффективность. Прошивка автоматически выбирает наиболее эффективный профиль производительности и увеличивает хешрейт без дополнительной настройки.
Установка
Пошаговая инструкция
Важно! Для установки прошивки Kryptex × GMiner используйте Toolkit. Версия прошивки ASIC должна быть до марта 2024 года
2
Откройте Toolkit → нажмите “Новая группа“ → введите имя группы и диапазон локальных IP-адресов → нажмите “ОК“, затем “Сканировать локальную сеть“
3
Выберите новую группу, выберите ASIC из списка и нажмите ”Установить прошивку”
4
Дождитесь завершения установки, затем нажмите ”Готово”
Вот и всё — прошивка обновлена, и ваш майнер перезагрузится автоматически.
Поддерживаемое оборудование
S19
BHB42801BHB42803BHB42811BHB42821BHB42831BHB42841
S19 Pro
BHB42641BHB42651
S19 Pro Hyd
HHB42602HHB42701HHB42711TH401
S19 Pro+ Hyd
HHB42601HHB42631
S19j+
BHB42701
S19j Pro
BHB42601BHB42603BHB42621BHB42631BHB42632
S19j Pro+
BHB42611BHB42612
S19 XP
BHB56601BHB56701BHB56801BHB56802BHB56806BHB68707BHB68709
S19 XP Hyd
HHB56601HHB56611HHB56613HHB56701
S19 XP+ Hyd
HHB68701HHB68703HHB68704H6HB68702
S19e XP Hyd
H6HB56702
S19j XP
BHB56804BHB56807BHB56814
S19k Pro
BHB56901BHB56902BHB56903BHB56906BHB56907
T19 Pro Hyd
HHB56702
S21
BHB68601BHB68603BHB68606
S21 Hyd
HHB68501HHB68502HHB68503HHB68504HHB68505HHB68601HHB68602
T21
BHB68701BHB68703BHB68705
S21 XP
A3HB70501A3HB70502A3HB705023A3HB70503
S21 XP Hyd
H6HB70501
S21 Pro
A3HB70601A3HB70602A3HB70603
S21 Pro Hyd
H6HB70601
S21e XP Hyd
H6HB70602
S21+
A3HB70701A3HB70601A3HB70602A3HB70603A3HB70501A3HB70502
S21+ Hyd
H6HB70701H6HB70702H6HB70704
S21e Hyd
H6HB70801H6HB70802
U3S19XP+H
H1HB68601
U3S19EXPH
H1HB56703
U3S21EXPH
H1HB70601
Поддерживаемые платы управления
BeagleBone
Xilinx 7007
Amlogic
Cvitek
Комиссия разработчиков GMiner
3%
История версий
1.22 (latest)
+Added support for S21+ Hyd (H6HB70701, H6HB70702, H6HB70704), S21e Hyd (H6HB70801, H6HB70802)
+Added support for APW11G0 power supply
+Possibility to disable hash boards cooling stage
+Improved miner stability
1.20
+Added support for Hiveon ASIC Hub
+Added coloring of heatmap according to the temperature of the chip
+Added use of the device serial number in the status
+Added support for APW111721b and APW111721c power supplies
+Added support for T19 Pro Hyd (HHB56702)
+Added support for S19 Pro Hyd (HHB42602, HHB42701, HHB42711, TH401)
+Added support for S19 Pro+ Hyd (HHB42601, HHB42631)
+Added support for S19 XP Hyd (HHB56601, HHB56611, HHB56613, HHB56701)
+Added support for S19 XP+ Hyd (HHB68701, HHB68703, HHB68704, H6HB68702)
+Added support for U3S19XP+H (H1HB68601)
+Added support for S19e XP Hyd (H6HB56702)
+Added support for U3S19EXPH (H1HB56703)
+Added support for S21 Hyd (HHB68501, HHB68502, HHB68503, HHB68504, HHB68505, HHB68601, HHB68602)
+Added support for S21 Pro Hyd (H6HB70601)
+Added support for S21e XP Hyd (H6HB70602)
+Added support for S21 XP Hyd (H6HB70501)
+Added support for U3S21EXPH (H1HB70601)
1.19
+Extends the voltage limits for power supplies (allows to select higher profiles for autotuning)
+Added S19k Pro submodels: BHB56906, BHB56907
+Added an option to set the time zone (correct time in downloaded logs)
1.18
+Added chips heatmap for S21 Pro and S21 XP
+Added support for the S19 XP+ (BHB68707, BHB68709)
+Added support for the S21 XP submodel (A3HB70503)
+Added display of ambient temperature for Amlogic control board (S21+, S21 Pro, S21 XP)
+Improved compatibility with the APW121215E power supply
+Added toolkit statistics export to a .CSV file
+Added display of error/warning in the web interface page header
+Added support of older OS for Toolkit (Windows 7 without Direct3D 12)
+Decreased Toolkit executable size by 10Mb, current Toolkit size is 37Mb (offline installer with embedded firmware for all control boards)
1.17
Toolkit:
+Added display of hashboard status, allows viewing errors by hashboard
+Added the ability to enable/disable miner search mode
Miner:
+Improved compatibility with power supplies
+Added backup saving for EEPROM, allowing the miner to start even if there are EEPROM issues
+Improved network connection failure handling logic
Web Interface:
+When switching performance profiles in manual temperature tuning mode, the selected temperature tuner settings are saved
1.16
+Improved fan control algorithm in auto mode
+Added the ability to configure the following options in the Toolkit: quiet fan mode, do not stop mining when the internet connection is lost
+Improved support for S21 Pro and S21 XP devices
1.15
+Added quiet fan mode (fan speed 50% while hash board cooling)
+Added option to allow mining without internet (allows keep ASIC at working temperature)
+Improved compatibility with mining pools
1.14
+Added S21+ submodels support: A3HB70601, A3HB70602, A3HB70603, A3HB70501, A3HB70502
1.13
+Added the ability to install GMiner on Bitmain stock firmware from late February 2024, including firmware from 2025 (no longer required to downgrade the stock device to an older firmware version)
+Improved logic for returning from a backup pool to the main
+Added S21+ submodels support: A3HB70702, A3HB70703
1.12
+Improved logic for switching to backup pools, detects domain blocking by the provider and switching to the next pool
+Reworked the option to ignore broken temperature sensors. Now, at least one working temperature sensor is required for mining. Specifying a minimum number of working sensors is no longer required
+Added an option to enable/disable DNS over HTTPS, allowing you to hide pool addresses from the provider
