Make sure to enable voltage control in MSI Afterburner settings.
It's convenient to not put the settings directly, do at least 3 jumps to reach my configuration values.
1. First the Core Clock, you can low this directly to my suggested value.
2. The Memory Clock, this one should increase gradually, try +500, +900, + 1100 and 1195 respectively.
3. Power limit, you can decrease this one rapidly until 65%, then try 60%, 57%, 56% and finally 55%.
Whit this configuration my Graphics Card works like this:
- Mine at ~61.7 MH/s
- 62 C temperature in a 10 < C < 20 room temperature.
- 132 W of power consumption.
- 62% of fan speed.
Note that every GPU is different, you could get lower or greater values, you could also move a bit some of them to improve the values for your specific card.
