P
ProMiner
- With Kryptex for 3 年，4 月
NVIDIA RTX A4000
1 年，4 月前- Ownership A few months
- Pros: GPU could be well overclocked, consumption is low (limited to 140 watts by the manufacturer). Thin.
- Cons: Doesn't work well with POW algorithms like RVN due to limited consumption. The price is high to take for mining. Better consider the RTX 3070.
- Commentary: Professional computing GPU. The graphics chip is like the RTX 3070 Ti, but the memory is the usual GDDR6, like the RTX 3060 or 3070 at 16 GB. Standard overclocking scheme for any algorithms: Power limit 95%, Core clock +100, Memory Clock +1500. On the Ethash algorithm 60+ mh\s, On RVN about 23 Mh\s, on ERGO about 150 Mh\s
NVIDIA V100
1 年，4 月前- Ownership A few months
- Pros: Does a great job of running heavy processes (code, AI), still mining well.
- Cons: Price, consumption, the GPU is old, released back in 2017
- Commentary: The graphics card price is very high, even in the used market. The payback of this video card (if you take it specifically for mining) is calculated in years. Definitely do not recommend buying it because it is not intended for mining, especially the video card of 2017. It is better to take a closer look at purchasing the same 2080 Ti. It also does not lend itself to overclocking; all that can be configured is Power Limit.
NVIDIA A100
1 年，4 月前- Ownership More than a year
- Pros: Powerful computing GPU
- Cons: High price, no active cooling, high power consumption, no video outputs.
- Commentary: Specific, narrowly focused graphic card for data centers, development, calculations, and simulation. Incredibly powerful and incredibly expensive. Even in mining, it shows excellent results thanks to the HBM2 memory, but it cannot be overclocked. All that can be configured is Power Limit. The card has high consumption. The card does not have video outputs or fans. Must be installed in special ventilated enclosures. I do not advise you to take it exclusively for mining.
AMD RX Vega 56
1 年，4 月前- Ownership More than a year
- Pros: GPU for enthusiasts. Despite its great age, it mines very well, the same as RTX 2000 series.
- Cons: It consumes a lot and heats up a lot. The card is already old and difficult to find on the secondary market in good condition. Virtually non-existent on the secondary market.
- Commentary: Great card for improving your skills, suitable for both enthusiasts and beginners. Hash rate is heavily dependent on your memory manufacturer and BIOS timings. Ethash (ETHW, ETC, UBQ, EXP) algorithm gives around 42+ MH\s with overclocking of 75% Power limit; 800-1200 Core Clock, 950-1000 Memory Clock; 70% fan speed. The KawPow (RVN) algorithm gives about 22 MH\s at a 90% Power limit; a Core Clock of 800-1200; a Memory Clock of 950-100, and a Fan speed of 75-80%. The Autolykos2 algorithm (ERGO) outputs about 120 MH\s with overclocking settings of a Power limit of 80%; a Core Clock of 800-1200; a Memory Clock of 950-1000, and a Fan speed of 70%.
AMD RX Vega 64
1 年，4 月前- Ownership More than a year
- Pros: GPU for enthusiasts. Despite its great age, it mines very well, the same as RTX 2000 series.
- Cons: It consumes a lot and heats up a lot. The card is already old and difficult to find on the secondary market in good condition. Virtually non-existent on the secondary market.
- Commentary: Great card for improving your skills, suitable for both enthusiasts and beginners. Hash rate is heavily dependent on your memory manufacturer and BIOS timings. Ethash (ETHW, ETC, UBQ, EXP) algorithm gives around 50+ MH\s with overclocking of 75% Power limit; 800-1200 Core Clock, 950-1000 Memory Clock; 70% fan speed. The KawPow (RVN) algorithm gives about 22 MH\s at a 90% Power limit; a Core Clock of 800-1200; a Memory Clock of 950-100, and a Fan speed of 75-80%. The Autolykos2 algorithm (ERGO) outputs about 125 MH\s with overclocking settings of a Power limit of 80%; a Core Clock of 800-1200; a Memory Clock of 950-1000, and a Fan speed of 70%.
AMD VII
1 年，4 月前- Ownership More than a year
- Pros: GPU for enthusiasts. Despite its great age, it mines very well, the same as RTX 3000 series.
- Cons: It consumes a lot and heats up a lot. The card is already old and difficult to find on the secondary market in good condition. Virtually non-existent on the secondary market. Really rare and expensive card.
- Commentary: Great card for improving your skills, suitable for both enthusiasts and beginners. Hash rate is heavily dependent on your memory manufacturer and BIOS timings. Ethash (ETHW, ETC, UBQ, EXP) algorithm gives around 95+ MH\s with overclocking of 100% Power limit; 1500-1700 Core Clock, 900-1100 Memory Clock; 70% fan speed. The KawPow (RVN) algorithm gives about 30 MH\s at a 100% Power limit; a Core Clock of 1500-1700; a Memory Clock of 900-1000, and a Fan speed of 75-80%. The Autolykos2 algorithm (ERGO) outputs about 180 MH\s with overclocking settings of a Power limit of 100%; a Core Clock of 1500-1700; a Memory Clock of 900-1000, and a Fan speed of 70%.
AMD RX 5500 XT 4GB
1 年，4 月前- Ownership A few months
- Pros: Only 4GB of memory, which supports very few algorithms and coins. It is not recommended for purchase.
- Cons: Average performance. Only 4GB of memory, which supports very few algorithms and coins. It is not recommended for purchase.
- Commentary: Ethash (ETC, UBQ, EXP) algorithm gives around 25+ MH\s with overclocking of 90% Power limit; 1800-1950 Core Clock, 1800-1950 Memory Clock; 60-70% fan speed. The KawPow (RVN) algorithm gives about 11 MH\s at a 90% Power limit; a Core Clock of 1800-1950; a Memory Clock of 1800-1950, and a Fan speed of 75-80%. The Autolykos2 algorithm (ERGO) outputs about 40 MH\s with overclocking settings of a Power limit of 90%; a Core Clock of 1800-1950; a Memory Clock of 1800-1950, and a Fan speed of 70%.
AMD RX 5500 XT 8GB
1 年，4 月前- Ownership A few months
- Pros: Low price, 8GB of VRAM.
- Cons: Average performance.
- Commentary: Ethash (ETHW, ETC, UBQ, EXP) algorithm gives around 25+ MH\s with overclocking of 90% Power limit; 1800-1950 Core Clock, 1800-1950 Memory Clock; 60-70% fan speed. The KawPow (RVN) algorithm gives about 11 MH\s at a 90% Power limit; a Core Clock of 1800-1950; a Memory Clock of 1800-1950, and a Fan speed of 75-80%. The Autolykos2 algorithm (ERGO) outputs about 40 MH\s with overclocking settings of a Power limit of 90%; a Core Clock of 1800-1950; a Memory Clock of 1800-1950, and a Fan speed of 70%.
AMD RX 5600 XT
1 年，4 月前- Ownership More than a year
- Pros: Low price, good mining performance, 6GB of VRAM.
- Cons: Old GPU, it is better to take RT 6700 XT.
- Commentary: Hash rate is highly dependent on the BIOS firmware. Ethash (ETHW, ETC, UBQ, EXP) algorithm gives around 42+ MH\s with overclocking of 75% Power limit; 1200-1400 Core Clock, 1780-1880 Memory Clock; 70% fan speed. The KawPow (RVN) algorithm gives about 15 MH\s at a 90% Power limit; a Core Clock of 1200-1400; a Memory Clock of 1750-1800, and a Fan speed of 75-80%. The Autolykos2 algorithm (ERGO) outputs about 80 MH\s with overclocking settings of a Power limit of 90%; a Core Clock of 1200-1400; a Memory Clock of 1750-1800, and a Fan speed of 70%.
AMD RX 5700 XT
1 年，4 月前- Ownership More than a year
- Pros: Kinda low price, good mining performance, 8GB of VRAM. A bit better than 5700
- Cons: Old GPU, hot, it is better to take RT 6700 XT.
- Commentary: Hash rate is highly dependent on the BIOS firmware. Ethash (ETHW, ETC, UBQ, EXP) algorithm gives around 52+ MH\s with overclocking of 75% Power limit; 1200-1400 Core Clock, 1780-1880 Memory Clock; 70% fan speed. The KawPow (RVN) algorithm gives about 18 MH\s at a 90% Power limit; a Core Clock of 1200-1400; a Memory Clock of 1750-1800, and a Fan speed of 75-80%. The Autolykos2 algorithm (ERGO) outputs about 100 MH\s with overclocking settings of a Power limit of 90%; a Core Clock of 1200-1400; a Memory Clock of 1750-1800, and a Fan speed of 70%.
